Consilium 5200028-00B SALWICO AIN1/100 Addressing device for conventional units
AIN1/100 is an addressable device used to connect conventional and IS modules such as smoke, heat and flame detectors to CS3000, CS4000 and NSAC-1 analog fire alarm systems. This addressable device processes the signal and determines the address number and type of the detector from which the signal comes. When the module(s) connected to the NS-AIN1 goes into alarm, the red LED on the device lights up and stays on until the alarm is reset from the control panel. A termination resistor (ELR-33) must be connected to the last device in order to correctly monitor for cable breaks in the system. Inputs: single conventional detector input; input maximum load: Up to 5 detectors or 250 µA; cable inputs: PG16: cable dia: 8-14 mm; cable terminal: 2.5 mm².
